Community electric membrane structure parking shed

The membrane structure shed is different from the traditional shed. Its steel members are designed by computer, and then cut by numerical control machine tools in the factory. The membrane materials are also cut in the factory. After these materials are delivered to the site, they are directly installed by workers, occupying a small space, and the installation speed is fast, which saves a lot of manpower and material costs, It also greatly reduces the impact on the surrounding population and environment. The membrane structure shed has a very good bearing function, and can accept a considerable load with a very small thickness. The strength and rigidity of the membrane structure shed mainly use the rationality of its several shapes, replace the tortuous internal force with the direct compression of the data, and then give full play to the potential of the data. Therefore, the membrane structure shed is an economical and reasonable structure with high strength, high rigidity and less data. 1. Daylighting. The sunlight shining on the roof transmits to the room in the form of diffuse light. Internally, the roof becomes a continuous bright surface, and its strength changes due to the relative position of the roof and the sun.

The daylighting coefficient (that is, the ratio of natural light intensity inside and outside the room) of the tension film structure car shed indoor space driver can generally be as high as 10%; However, in the traditional construction, the light can only enter the room from the limited lighting window, and its lighting coefficient is less than 3%. Even on cloudy days, the light level in the membrane structure room can meet the basic requirements of most activities. 2. Reflectivity. Because the transmitted light and reflected light entering the membrane structure shed are diffuse light, glare is unlikely to emerge. However, it is necessary to consider the arrangement of the glass daylighting area and sunshade to avoid glare caused by its direct light. 3. Color. Indoor people in the film structure shed will have a good color perception of white or off white film materials, because these two colors show the characteristics of linear spectral transmission of visible light. The transmission degree increases with the increase of the wavelength of the transmitted light, which makes the transmitted light slightly warmer than the incident light. Transmission spectrum, fiber and its characteristics, coating thickness, etc.