Membrane structure landscape Maintenance and protection of the project

1. General requirements for project protection

Protection and protection of membrane structure engineering. The surface of the membrane material shall not be touched by knives and sharp tools to avoid scratching and abrading the surface of the membrane material. Once the membrane material is found to be scratched and severely abraded, effective measures shall be taken in time to prevent the abrasion from becoming more severe. At the same time, the manufacturer shall be notified to send personnel for correction. The surface of steel members shall not be hit and scratched by hard objects, and shall not touch various acidic, alkaline and organic solvents.

2. When the membrane surface needs to be cleaned:

a. Workers should not wear hard soled shoes to touch the surface directly, so as to avoid sand abrasion and severe abrasion of the surface.

b. When cleaning the surface of the membrane, use clean water or neutral detergent instead of acidic or alkaline solvent such as gasoline, alcohol, chlorine water, etc.

c. Foreign matters such as iron parts, chemicals or other colored materials should not be stacked on the surface of the film for a long time.

3. The steel structure, steel cable, plywood, bolt and other components in the structure shall not be adjusted or disassembled without the approval of the manufacturer.

4. It is not allowed to pull or hang heavy objects and articles on the membrane materials without permission.

5. Users shall regularly (half a year to one year) rust and protect the safety of steel structures to ensure structural safety and prevent rust water from dropping on the surface of film materials.

The content of this article comes from the network. If you have any questions, please contact me to delete it!