1. Some partition system materials will not bring waste to the environment. It is a green and environmentally friendly building material with long service life. In the long run, for manufacturers with good separation, it is cheaper and more economical to install high partition system materials than other forms of partition materials.

2. During the use of the glass canopy, the positions of doors, windows, solid modules and the glass canopy can be changed at any time, and the glass canopy can be reassembled and reused. After the materials are disassembled and assembled, the damage is very small, and the cost caused by frequent office relocation can be greatly reduced.

3. The internal structure of the glass ceiling can be conveniently used for cable laying. There is no need to build walls and bury them. It is more convenient to replace cables and maintain them. Strong current and weak current are separated. The cable trough can be used as a shield for signal lines.

4. Glass ceiling, installation speed is faster than ordinary partition.

5. Well isolated glass ceiling for fire prevention. The compartment system consists of all metal structures. Glass, colored steel plate and other materials are also fire-resistant. When the internal structure of the cabin system is steel structure, the super limit of fire resistance is 30 minutes, 60 minutes or more.

6. The glass lamp shade is free of pollution and odor, and can be used immediately after installation.

7. A sealing strip is pre installed inside the door frame of the glass canopy to improve the sound insulation effect and sealing performance. The sound insulation system can be completed by adding a door bottom sealing strip.

8. The glass door lock at the entrance of the glass canopy can be installed in the middle, which is very convenient to use.

9. High quality imported glass blinds can be installed in two layers of glass, not easy to get dirty and free of cleaning.

10. The glass canopy has good sound insulation effect, and the partition wall has good sound insulation effect.

11. The glass lampshade can be made of a variety of materials, including double glass and shutter, or color steel plate, gypsum board, melamine board, fireproof board, cloth, etc.

The content of this article comes from the network. If you have any questions, please contact me to delete it!