1. Among ordinary glass awnings, ordinary glass awnings are simple and bright, colored glass awnings are beautiful and refined, sandblasted or carved glass awnings are expensive and elegant, and the mysterious and extensive visual effects of cracked glass awnings are actually created by different materials.
2. The glass canopy with crack effect must be made of special tempered glass that has been broken by impact and glued with special technology. Therefore, there will not be two identical models, which is in line with the characteristics of modern people's pursuit of individuality. The first thing to choose this kind of glass partition is to choose a pattern. The crack propagation effect is particularly good.
3. Ordinary glass lampshade looks simple, but it is not so. Among them, laminated glass is particularly good, which is rare in the market. The advantage of this glass is that it looks
It is the same as ordinary glass, but in case of accidental impact, glass fragments will be firmly attached to the SafiexPAB film in the glass, so that no fragments will splash out and no threat to personal safety will occur.
4、 To ensure safety, most glass awnings will use tempered glass. The difference between tempered glass and ordinary glass is that tempered glass is actually a prestressed glass. In order to improve the strength of glass, chemical or physical methods are usually used to form compressive stress on the surface of glass. When the glass is subjected to external force, it will first offset the surface stress, thus improving the bearing capacity of the glass itself, and enhancing its resistance to wind pressure, cold and hot shock. In addition, the hazard of broken tempered glass to human body is much smaller than that of ordinary glass, and the risk is also small.
Canopy is a kind of building component installed above the entrance or top balcony of a building to prevent rain and falling objects from high altitude from hurting people. Tempered and laminated rubbers are commonly used. Tempered glass is made by heating ordinary glass on average and cooling at corresponding cooling rate according to different thickness when it approaches softening point. There is a strong persistent internal stress in the glass, and the tensile stress in the inner layer and the compressive stress in the outer layer are in a stable stress balance state.
The content of this article comes from the network. If you have any questions, please contact me to delete it!