Membrane structure landscape Before the commencement of the plant project, the surveyor shall be arranged to recheck the vertical and horizontal axis deviation of the embedded parts and the elevation of the embedded parts, carefully record the recheck data of each column, and copy the relevant data to the person in charge of the project department, the person in charge of skills, and the construction workers and construction teams. During construction, each construction team uses this data as the basis for adjustment and alignment of component devices. The survey personnel shall be arranged together to return the docking points of the main arch and the secondary arch to the ground, and the survey marks shall be made on each return point.

What should be paid attention to when cutting the membrane structure canopy?

The cutting process is just one of the processes in the manufacturing process of the product. In this process, it should be strictly planned according to the shape and size required by the user. First, the drawings should be drawn, and then the operation should be carried out by professional and skilled personnel.

The first is the width of the membrane data: the width of the membrane data should be taken into account when the plane grid is divided during the shape analysis. Try to make the membrane unit included in a piece of membrane cloth complete, otherwise, the position of the gap point of the membrane block shall be confirmed through interpolation calculation.

The second is surface curvature: if the curvature of adjacent units differs greatly, it means that the surface is seriously distorted at this location. If the cutting seam is not blocked at this location and starts again, the gap of the cutting film block will have a large arc here. The general trend of geodesic line can be distinguished from the change trend of curvature of adjacent units.

Then there is the trend of the gap: if the gap is relatively straight, consider using the long side of a membrane block as the gap. Otherwise, the gap can only be formed by splicing the short edges of multiple membrane blocks.

Beautiful: because the film material is transparent, the weld can be clearly seen in the actual structure, so the placement of the cutting seam must be regular and reasonable to form some beautiful patterns to increase the beauty of the film structure.

The membrane structure landscape shall have professional process lines, necessary cutting, heat sealing equipment and testing equipment. All of them shall be provided with membrane structure cutting planning software that has been judged or professionally evaluated.

Manufacturer of membrane structure parking shed The testing equipment, things and measuring tools used for manufacturing the membrane structure shall comply with the relevant national regulations, and the measuring tools shall be calibrated once after passing the measurement judgment.

The membrane structure processing operator must have a professional training work license, and the work license should specify the post and skill requirements.

The manufacturing of membrane structure is divided into cutting and connection of membrane, manufacturing, processing, packaging and transportation of accessories. Manufacturing shall conform to the following process flow: acceptance of membrane materials, confirmation of technical parameters, cutting of membrane, inspection of several scales of cutting membrane, connection of membrane, inspection of connection strength, inspection of several shapes of membrane body, positioning and fixing of connectors, arrangement of membrane body, packaging and marking of membrane body.

(All the above content comes from the network. If you have any questions, please contact me to delete it)