We are using Membrane structure landscape When charging posts, it is also necessary to check the membrane charging posts and install them after ensuring the quality of the membrane charging posts. Then, what problems should we pay attention to when checking the membrane structure? Four checks should be done before installing the membrane structure charging pile. Before formally installing the membrane structure charging pile, the user should measure and recheck the size of the steel structure.

Before installing the membrane structure landscape charging pile, temporary support or balance cable should be added to the cantilever beam of the steel structure to ensure the force balance of the membrane structure during the installation of membrane materials. During the installation process, we also need to pay attention to the problem that there should be no scratches during the installation, and to maintain the integrity of the membrane materials.

The membrane structure landscape should be delivered and declared with Party A, and attention should be paid to maintenance, so as to ensure the service life of membrane materials. Four inspections should be done before installing the membrane structure charging pile. I believe that the above introduction can help everyone, and the production should be strictly in accordance with the provisions of the design drawings and engineering documents. Special equipment shall be used for film cutting, heat sealing and other production processes, and relevant measuring instruments shall be qualified through measurement calibration. Membrane structure parking shed Membrane materials of the same batch number shall be used in the project. The working platform for membrane materials shall be dry and free of dirt. Membrane materials shall be kept clean throughout the processing and manufacturing process. The packaging method of the membrane unit shall be determined according to the characteristics and characteristics of the membrane materials in this project, and measures shall be taken to ensure that there is no relative movement between the membrane unit and the transportation means and that the processing and manufacturing site of the membrane structure shed shall be flat.

The content of this article comes from the network. If you have any questions, please contact me to delete it!