Membrane structure landscape According to the requirements of fabrication, installation and transportation of the project, the operation instructions or process cards for each process shall be prepared according to the overall planning of prefabrication in the factory and on-site installation. Five days before the construction, relevant departments shall be organized to maintain various machinery and equipment used in the construction, so as to avoid mechanical failure during the construction process, which will affect the construction.

According to the requirements of the construction organization design, the membrane structure landscape shall be equipped with all kinds of materials and tools required for construction, as well as all kinds of slings used for hoisting, cable fixing, wind ropes, etc., welding process assessment: butt weld and fillet weld welding process assessment, welders and other types of work shall be trained before they go on duty, and all measuring instruments and equipment shall be inspected, maintained and submitted for inspection after passing the examination, Before the commencement of the installation project, the survey personnel shall be organized to recheck the deviation of the longitudinal and transverse axes of the embedded parts, the elevation of the embedded parts, and carefully record the recheck data of each column.

The relevant data of membrane structure landscape shall be copied to the person in charge of the project department, the technical director, all constructors and construction teams. During construction, each construction team uses this data as the basis for component installation, adjustment and alignment. At the same time, the survey personnel shall be organized to return the docking points of the main arch and the secondary arch to the ground, and the survey marks shall be made on each return point. After the processed components are transported to the site, the technical director shall organize full-time personnel to carefully review the components or semi-finished products, and carefully record the review data. When transferring components or semi-finished products to the next process, the inspection records shall be transferred to the construction leader of the next process together with the transfer list of components or semi-finished products.

The content of this article comes from the network. If you have any questions, please contact me to delete it!