What kind of process does the device usually go through? First, preparation, Manufacturer of membrane structure parking shed There is a lot of preparation required before the installation, not only for personnel, but also for things and places. If we are working in a rough place, it is also necessary to clean up the surrounding environment. The general requirement is that there should be no other impurities or uneven membrane structure shed.
Measure the geometry of the supporting structure and connecting nodes and compare them with the planning values, and make necessary corrections to the results of finding; Cutting planning shall be carried out according to the modified shape, and the film surface shall be processed; If the membrane surface has been fabricated before the completion of the supporting structure, the deviation shall be corrected through other schemes such as changing the specifications of the connecting pieces; Fold and pack the processed membrane products according to the requirements of the construction organization plan, and mark them; Deliver to the plant site; Clean up the site and set off protective materials on the ground; Explain the process and division of labor to workers; Open the membrane surface and carry out preparations such as punching holes on the membrane surface, threading steel cables, installing membrane corner gusset plates or membrane splints; Tie rope net on the supporting structure to temporarily support the opened membrane surface.
The price of membrane materials is a key issue. In addition to the requirement that the function of membrane materials meet the requirements of membrane structure construction, it is also important that the price of membrane materials exceed the budget. Membrane structure parking shed
The processable function and width of the membrane structure data and the shape of the membrane surface of the membrane structure construction renderings.
<All the above content comes from the network. If you have any questions, please contact me to delete>