The steel supported anti hanging fluorocarbon fiber membrane structure is a new structural method specially developed for sewage tank capping. The anti-corrosion fluorocarbon fiber membrane is selected as the cover material, and the anti hanging method is used to the corrosive environment of the sewage tank. There are also many different types of membrane structures. Today, let's talk about the types of membrane structures that can be classified according to their structures. Out of context, this membrane is covered on the skeleton, just like the traditional skill of building a house. When building a roof, we usually put up the approximate structures first.

Membrane structure equipment The planning of membrane structure mainly includes four major issues: shape planning, initial balance shape analysis, load analysis, and cutting analysis. Through figure planning, the building plane shape standard, three-dimensional modeling, clearance volume, coordinates and structural methods of each control point are recognized, and membrane materials and construction plans are selected. Initial equilibrium shape analysis is called form finding analysis. Since the membrane data itself has no compression and bending stiffness, and the main shear strength is very poor, its stiffness and stability need to be improved by the curvature change of the membrane surface and the prestress between them. For membrane structures, there is no stress free state at any time, so the shape of the membrane surface must be satisfied with the mechanical balance under certain boundary conditions and certain prestress conditions, Based on this, load analysis and clipping analysis are carried out.

When paying attention to the membrane structure shed tensioning for the customer's equipment at all times, confirm the batch tensioning sequence and quantity, control the tensioning speed, and confirm the over tensioning quantity according to the characteristics of the data. Membrane structure landscape

When the next process or adjacent works start construction, protective measures shall be taken for the completed part of the membrane structure to prevent damage. Without effective protection measures, welding and cutting operations are prohibited within 2m around the membrane materials.

<All the above content comes from the network. If you have any questions, please contact me to delete>