Membrane structure landscape What kind of operation is usually used for construction? Speaking of Membrane structure landscape architecture More people think it is red brick and concrete, which is also a common building. So, what are the applications of the inflatable membrane structure we will discuss today? Like traditional structures, inflatable membrane structures are also suitable for most operations. In addition, the structure of inflatable membrane structures depends on the common features of large span, separability and sealing, which can be used in more categories.

   Industry is the frequent operation of inflatable membrane, such as our common open-pit coal mines and coal mines. The use of inflatable membranes has some advantages. In the industrial category, the closed inflatable membrane structure can greatly reduce the damage to the surrounding environment. This is one of the reasons why it is often used

   The load analysis of membrane structures is based on the shape and initial stress distribution obtained through shape analysis, and the process of checking whether the strength and stiffness of the structure meet the predetermined requirements under various load combinations. The load analysis of membrane structure basically adopts nonlinear finite element method, that is, the structure is discrete into elements and nodes, and the elements are connected through nodes. The external load acts on the node, and the solution is obtained by establishing the balance equation of the node.   。

  In our daily life, the service life of membrane structure data using extensive membrane structure maps is much longer than that of other materials, but it is still inseparable from our maintenance. Then hurry up and look at this content with us!

1. The coating method of the doctor blade is mainly to use the doctor blade to apply a certain amount of coating liquid to the substrate. The thickness of the coating is adjusted by the gap between the scraper and the backing cloth. The method can process thin materials, and the method can apply coatings of different materials to both sides of the membrane material.

2. Roller coating method In this method, several rollers are used to apply the coating solution to the substrate during transportation.

3. Carving roller coating method This method is a combination of scraper coating method and roller coating method. The convex part of the outer surface of the concave convex engraving roll is coated with coating liquid through a scraper, and the coating liquid in the concave part is quantitatively transmitted to the substrate. Above, the TiO2 film data coating was processed by this method.

  4. Roll method Use the heated roll to roll the coating liquid into film. After several rounds, the coating film is combined with the backing cloth. This method can be used for thicker coating treatment and can be more refined. Adjust the thickness of the coating.

5. Keep away from acids and alkalis. Acids and alkalis are the killers of the membrane structure scene. Acids and alkalis are corrosive to steel structures and membrane data. If the steel structure is accidentally contaminated by acid (such as sulfuric acid, vinegar) or alkali (such as formaldehyde, soapy water, soda water), it should be cleaned with clean water immediately, and then dry the cloth with dry cotton. Avoid acid and alkali corrosion of steel materials.

   Through the above understanding, let us know that these methods can ensure the service life of membrane structure landscape.

The content of this article comes from the network. If you have any questions, please contact me to delete it!