Balcony guardrail Installation tips:

 1. The installation height of steel pipe for balcony fence shall not be less than 1000mm.

2. The length of protective railing is greater than 2000mm The railing shall be provided with columns.

3. Pole spacing 2000mm ， Diagonal bracing shall be set on four sides as required. At the same time, the protective shed is isolated from the main body

4. Four week design 1000mm High protective railings, and the outside of the protective shed is completely enclosed with vertical nets.

Precautions for installation of balcony guardrail: a qualified balcony guardrail must be built, the foundation must be flat and solid, and apron and drainage ditch must be set around it.

5. Some balconies are outside the house, so we need to set a roof. Generally speaking, the roof is set as a double-layer protective shed.

6. After installation, be clean and tidy.

The protective fence is a non dangerous measure, but some owners remove the protective fence for the sake of beauty, which is particularly dangerous. Install guardrails on balconies and windows, and the clear height of guardrails shall not be less than 1.05M , the clear height of guardrail of middle and high rise buildings is not less than 1.1m The balcony guardrail is higher than the windowsill guardrail 0.9m 。 Of course, the height of the protective fence can be increased appropriately.

If the purpose of non dangerous protection is to be achieved, protective fences cannot be installed at will. The correct method must be used to standardize the operation to ensure that the specification and height of the protective fence meet the general requirements. Otherwise, there will be hidden dangers and accidents without danger. So we must pay attention.

The above is about the safety fence. Do you understand it?

The content of this article comes from the network. If you have any questions, please contact me to delete it!