Membrane structure shed After the completion of the project, Huangshi outdoor membrane structure bicycle shed is customized, and everyone hopes that its service life can be longer. Although the membrane materials and steel structures of the membrane structure shed are wear-resistant and durable, they are not easy to be damaged, but the polymer materials and metal materials also have their own weaknesses, which need careful maintenance.

  1. Avoid collision

  After the completion of the membrane structure shed project, Huangshi outdoor membrane structure bicycle shed will be customized. It should be noted that when parking vehicles, you should be careful to back up. Huangshi outdoor membrane structure bicycle shed will be customized, and you should not touch the steel structure of the membrane structure shed. It is also necessary to prevent hard objects from rubbing against the roof of the shed.

two 、 Keep away from acid-base substances

Acids and alkalis are taboos for membrane structure sheds. Acids and alkalis have corrosive effects on steel structures and membrane materials. If the steel structure is accidentally stained with acid ( Such as vinegar), alkali (such as methylamine, soapy water, soda water), should be immediately washed with clean water, and then dry with dry cotton cloth. Avoid acid and alkali corrosion of steel materials.

  3. Eliminate rust

  If the steel structure is rusted and the rust has expanded to a large area, relevant technicians should be invited to repair it. Grinding, sand blasting and painting.

  Difference between baking technology and spray painting of film structure shed

4. About process

  Baking paint: apply three coats of primer and four coats of finish paint on the substrate, and send each coat of paint to the dust-free constant temperature baking room for baking. Grind the woolen cloth on the base material, spray paint on it, and dry it naturally. The edges and corners are smooth and the color is the same. It proves that the paint film is uniform and full of color. The edges and corners are rough and the color is lighter than the door panel. Prove that the paint film is uneven and the color is not full; The door panel surface is flat and smooth. There are particles on the surface of the door panel, which is not smooth and has strange feeling.

  five Wear resistant method: strike with hard objects.

The content of this article comes from the network. If you have any questions, please contact me to delete it!