The folding membrane structure shed uses membrane materials instead of traditional building materials, and its weight is only one third of that of traditional buildings. In addition, membrane structures can fundamentally overcome the difficulties encountered by traditional membrane structures in long-span (unsupported) buildings, and create a huge and unobstructed visual space.
First of all, according to the construction drawing, the processing preparation and blanking shall be listed: when setting out and marking, welding shrinkage and processing allowance shall be reserved, and setting out shall be used as a template.
2、 Measurement and setting out: measure the elevation core line of the embedded parts according to the civil engineering elevation baseline, and check the elevation deviation and left and right deviation of the embedded parts. Sort out the results and determine the adjustment and treatment scheme for the separation of embedded parts.
3、 Installation process of embedded parts: locate the installation position of embedded parts and drill holes for installation. Embedded parts shall be accurately positioned and firmly embedded. Elevation deviation is not greater than 9 mm, left and right displacement not more than 20 mm
4、 Installation and welding of suspension arm: installation and welding of suspension arm shall be conducted by welding. Check the welding nodes and adjust the design slope of the boom to make it accurate. After one suspension arm on one side is accurate, install the other suspension arm on the other side and spot weld it after it is installed in place.
Fabrication steps of membrane structure shed:
1、 Reverse tension membrane structure; Reverse bend shape or double bend saddle shape with tension and stability. The tension and stability come from the mechanical prestress of the membrane plane and its linear boundary.
2、 Tension Membrane structure parking shed Bend in the same direction. Same direction bending shape, or double bending spherical shape, with tension and stability. Tension and stability are produced by air or water pressure acting vertically on the membrane surface. This structure includes air bearing structure and inflatable structure.
If you encounter any problems in the process of making the membrane structure parking shed, you should consult the professional technicians who make the membrane structure parking shed to ensure safety and energy conservation.
The content of this article comes from the network. If you have any questions, please contact me to delete it!