Membrane structure landscape Also known as fabric structure, it uses soft fabrics with excellent performance as materials, supports the membrane surface by internal air pressure, or uses flexible cables and rigid support structures to generate a certain preload on the membrane surface, thus forming a new spatial structure system with a certain stiffness and can cover large spaces. Membrane structures can generally be divided into air supporting membrane structures (i.e. inflatable membrane structures), tensioned membrane structures and skeleton supporting membrane structures. They have different structural characteristics, architectural manifestations and adapt to different applications.
The steel supported anti hanging fluorocarbon fiber membrane structure is a new type of structure specially developed for sewage tank capping. The anti-corrosion fluorocarbon fiber membrane is selected as the covering material, and the anti hanging form is used to adapt to the corrosive environment of the sewage tank. In domestic sewage stations such as Xinchang Pharmaceutical Factory, Xinhecheng Co., Ltd. and Yongning Pharmaceutical Factory, the steel supported anti hanging fluorocarbon fiber membrane has been used for sewage pool capping, and good results have been achieved.
There are also many different types of membrane structures. Today, Shenyang membrane structure manufacturer Xiao Bian came to tell us what kind of structures they can be classified into if they are classified according to structures. As the name implies, this membrane is covered on the skeleton, just like the traditional technology of building houses. When building roofs, we usually put up the frames first
Then lay the tiles upward according to certain rules. This structure is the most common structure. Because of its low operating difficulty and cheap quotation, the name shows that its tension is very good, so it can meet various technical requirements to the greatest extent. However, its quotation is a little more expensive than the skeleton membrane structure. The manufacturer of the breaking hammer informed us, The other is the inflatable membrane structure. Its initial condition is very small. After installation, you can work hard inside.
The load analysis of membrane structure is based on the shape and initial stress distribution obtained from shape analysis, and the process of checking whether the strength and stiffness of the structure under various load combinations meet the predetermined requirements. The load analysis of membrane structures basically adopts nonlinear finite element method, that is, the structure is discrete into elements and nodes, the elements are connected with each other through nodes, and external loads act on the nodes. The solution is obtained by establishing the balance equation of the nodes.
