-
In fact, the shape of the building should be proposed by the constructor, but the membrane structure has the problem of shape finding, so the constructor often requires the structural engineer to determine. However, shape finding is not the same. Different internal forces will find a different building shape, and different shapes will directly affect the construction effect. It is worth mentioning that different building shapes may directly affect the economy of the project.
Published on: August 28, 2020 Number of hits: 50
-
The large-span inflatable membrane is used to manufacture inflatable membrane basketball halls, badminton halls, natatoriums, skating halls, etc. The inflatable membrane relies on excellent old plant transformation technology to deal with the lack of sports equipment and places in China. The inflatable membrane has the advantages of fast manufacturing speed and low cost, so it is very suitable for manufacturing various stadiums. The full sealing planning of inflatable membrane for environmental protection can be used for solid waste treatment and waste landfill in environmental protection
Published on: August 27, 2020 Number of hits: 40
-
The awning frame made of stainless steel pipes and plastic spraying pipes for the film structure awning is light in weight, high in strength, anti-corrosion, thermal insulation and strength, which are several times of the data of ordinary plastic plates. Supporting "electric car" fashion: active wiper, wide vision. The windshield produced by the joint venture is in the front, with high smoothness and good light transmittance. It is equipped with micro active wiper, which has broad prospects for development. Membranous junction
Published on: August 25, 2020 Clicks: 51
-
It is very advantageous to use the membrane structure planning method to plan the sunshade, whether in appearance or practicality. Membrane structure building has a more "form finding" process in structural planning. It needs to first recognize several shapes under the initial load, that is, the structural system can reach a balance position under the self weight of the membrane and the prestress effect of cables and cable components. Start at
Published on: August 25, 2020 Number of hits: 49
-
Some car sheds use durable film for 30 to 40 years. Especially in severe stormy weather, the membrane structure is firm and cannot move. economics. For vehicles parked in the open for a long time, the performance loss rate is twice that of vehicles parked in the greenhouse. The roof with membrane structure can protect your car and slow down its aging speed. From an economic perspective,
Published on: August 24, 2020 Clicks: 71
-
The important information of the film structure sunshade is the film material, and the information of the film material is the resin information. This kind of data has a strong function of heat insulation and reflection. The membrane sunshade is used in people's daily life, and it really works well. Because the sunshade with membrane structure reflects sunlight. It can protect the car effectively and won't absorb too much heat. The film structure sunshade also has UV protection and resistance
Published on: August 23, 2020 Number of hits: 48
-
The membrane structure is supported by columns and steel frames or tensioned by steel cables. It is composed of membrane materials, steel cables and pillars. Tension is introduced into the membrane materials by steel cables and pillars to achieve stability. In addition to practical, creative, and beautiful shapes, it is also a structural way to show the spirit of membrane structure. Large span spaces also use steel cables and compressed materials to form a steel cable net to support the upper part
Published on: August 22, 2020 Number of hits: 41
-
The whole planning is analyzed by mechanics. Due to different shapes, the same object may have different stress states at each point. When a storm strikes, some edges can withstand the storm, but some edges cannot withstand the storm. This will lead to a weak point in the area unable to withstand the storm, which will be easily broken, leading to the collapse of the entire shed. Therefore, in the planning process, it is necessary to
Published on: August 18, 2020 Number of hits: 43
-
Although the membrane structure shed is made of new materials, it bears great pressure in the process of application. Because the shape of the membrane structure shed is different from that of the traditional shed, the compression resistance of the membrane structure shed is achieved by tensioning the membrane surface in different shapes, which is why the membrane structure shed has a variety of shapes. The important thing of membrane structure building is to solve the problem of membrane structure
Published on: August 16, 2020 Number of hits: 40
-
The manufacturing principle of membrane structure is to ensure its beauty and strong durability, which is mainly reflected in its own characteristics. However, the membrane structures displayed in front of us are very artistic. This art is due to cutting. When manufacturers produce membrane structures, they do not produce membrane structures or have various shapes, but they are all cut by human craftsmanship. I believe in membrane
Published on: August 14, 2020 Clicks: 23
-
The construction weight of membrane structure engineering is light: because the information and structure selected for membrane structure confirm that membrane structure engineering is a light structure, which is very light compared with other traditional construction structures. Long construction life of membrane structures: membrane structures belong to semi construction. The early membrane structure has been used for more than 30 years in the world and is still in use. Its steel
Published on: August 14, 2020 Number of hits: 33
-
The film structure sunshade is useful to resist ultraviolet rays: it is not enough to reduce the temperature in the sunshade. The film structure sunshade can also be useful to resist ultraviolet rays in the sun. Ultraviolet ray is one of the light waves. It can make our skin dark, deteriorate the skin quality, and deteriorate iron, steel, copper, plastic and other objects. After the membrane structure blocks the ultraviolet ray, the objects in the sunshade are in extreme heat
Published on: August 13, 2020 Clicks: 41
-
Lay tiles according to certain rules. This structure is particularly common. Because of its low operation difficulty and cheap quotation, the name tells us that its tension is very good, so it can be greatly changed to meet the requirements of various technologies, but its price is more expensive than its skeleton membrane structure. The manufacturer of the breaking hammer told us that there are also inflatable membrane joints
Published on: August 12, 2020 Clicks: 28
-
The influence of geometric nonlinearity should be considered in the calculation of membrane structures based on their large deformation characteristics, and the material properties can be considered in accordance with linearity. Cables and membranes in membrane structures can only accept tension, but not pressure and bending moment. The cable membrane relaxation shall be avoided as far as possible during the planning under normal service conditions. In the planning, it shall be ensured that the stress of the membrane material under the load effect shall not be greater than the allowable stress of the material
Published on: August 11, 2020 Number of hits: 30
-
The more simple, simple and pure the color of the membrane structure shed device, the more classic it is. This is an irrefutable truth. Your membrane structure shed should also have a certain target style, such as alternative, modern, calm, etc. If you want to know which style can resist the popularity, of course, the classical style membrane structure shed will be the first choice. The reason is very simple, after the change of time and times
Published on: August 11, 2020 Number of hits: 30
-
The membrane structure shed shall be cleaned regularly, and professional cleaning agent shall be selected for cleaning. From the perspective of skills, membrane structures do not necessarily need cleaning. For most membrane materials, cleaning cannot extend their working life. On the contrary, improper cleaning will shorten their life. Pay attention to the daily protection of the membrane structure shed, which can improve the service life. The shape of the building should actually be proposed by the constructor
Published on: August 9, 2020 Number of hits: 21
-
Some car sheds use durable film for 30 to 40 years. Especially in severe stormy weather, the membrane structure is consolidated rather than moved. economics. For vehicles parked in the open for a long time, the performance loss rate is twice that of vehicles parked in the greenhouse. The roof with membrane structure can maintain your car and slow down its aging speed. From an economic perspective,
Published on: August 7, 2020 Number of hits: 64
-
Long construction life of membrane structures: membrane structures belong to semi construction. The membrane structure has been used for more than 30 years in the world and is still in use. Its steel skeleton can be used only after anti-corrosion coating and timely maintenance. The membrane material used for construction is a kind of composite material with outstanding mechanical properties, high strength, aging resistance, and only structural planning
Published on: August 7, 2020 Number of hits: 28
-
As for membrane structure, it does not exist at any time. There is no stress condition, so under certain boundary conditions and certain prestress conditions, the shape of the membrane surface is satisfied with mechanical balance, and load analysis and cutting analysis are based on this. The shape discovery and analysis methods of membrane structures mainly include dynamic relaxation method, force density method and finite element method. Consider loads for membrane structures
Published on: August 6, 2020 Number of hits: 69
-
When cleaning the surface of the membrane, clean it with clean water or neutral detergent, not with acidic or alkaline solvent such as gasoline, alcohol, chlorine water, etc. Foreign matters such as iron parts, chemicals or other colored materials should not be stacked on the surface of the film for a long time. The steel structure, steel cable, plywood, bolt and other components in the structure shall not be adjusted or disassembled without the approval of the manufacturer. unauthorized
Published on: August 5, 2020 Number of hits: 46
48 in total
20 entries per page
Page: 2/3
